DVD trays are designed to open with a push from the back of the player. If this does not happen, then your DVD tray may be broken or the pivot point for opening jammed. The first step is to determine if your DVD tray actually opens using either a screwdriver or fingernail as leverage on one side and pushing down on it from underneath. You will need access to both sides in order to properly diagnose this issue
The “how to open a stuck dvd player tray” is a question that has been asked by many people. There are many different fixes for this issue, but the most common fix is to unplug the DVD player and plug it back in again.
Can’t Open the Tray or Eject the Disc From the DVD Player
- Make sure the child lock feature is disabled.
- Try to open the disc tray.
- If the issue still occurs, power off your DVD player.
- Unplug the power cord for 30 seconds and then plug it back in.
- Power on your device.
- Try to open the disc tray.
Correspondingly, how do you fix a jammed DVD player?
Here’s what to do:
- Unplug the disc player.
- Take out the screws securing the cover and remove it.
- Blow air into the mechanism to remove dust.
- Plug the player back in.
- Try ejecting the tray.
- If it doesn’t eject, look for something jamming the tray.
- Also see if the belt is damaged or broken or fell off.
Secondly, how do you reset a DVD player? You can reset your DVD player either via a remote control combination button press or via the screen menu (SETUP) return set (reset). Your instruction manual will normally give accurate instructions for resetting the player. Look over the chapeter titled “reset” or “Initialize mode” .
Also to know is, why does my DVD player not open?
To power reset, turn OFF the DVD player and unplug the power cord from the electrical outlet for 30 seconds. Plug the power cord back into the electrical outlet and turn the player ON. Attempt to open the disc tray. If the disc tray still does not open, simultaneously press the DISC1 + STOP + EJECT buttons.
How do you open a jammed CD tray?
How to Open a Jammed CD/DVD Drive
- Step 1: The Paper Clip. Straighten out one leg of the paper clip.
- Step 2: The Small Hole. Find the small hole on your CD drive, it is usually near the button.
- Step 3: Stick the Clip Into the Hole. Stick the clip into the hole and gently push until the door opens.
- Step 4: Finish. The drive opened!
- 20 Discussions. HerbertW4.
Related Question Answers
How do I manually open my Samsung DVD player?
2 Plug the DVD player back in to the electrical outlet, but do not turn the DVD player on. 3 With the DVD player off, press the [Open/Close] button on the front of the DVD player. The home theater should power on when you press the [Open/Close] button and eject the tray.
How do I fix my Sony DVD player that won’t open?
Steps to open the disc tray
- Turn off your device.
- Unplug the power cord or AC adapter.
- Leave the device unplugged for 30 seconds.
- Press and hold the.
- After the tray opens, release the OPEN/CLOSE button.
- Remove the disc.
How do I open the disk tray?
The Eject key is usually located near the volume controls and is marked by a triangle pointing up with a line underneath. In Windows, search for and open File Explorer. In the Computer window, select the icon for the disc drive that is stuck, right-click the icon, and then click Eject. The disc tray should open.
Why my CD drive is not opening?
Look for the small manual eject hole (not the headphone jack) located on the front of the drive. Unwind a paper clip and place one end of the paper clip into the hole to eject the CD-ROM tray. You may need to apply some pressure to activate the manual tray ejection. But usually, a stuck CD is blocking the way.
Why isn’t my DVD player working on my laptop?
First, make sure that the computer’s optical drive is capable of reading DVD media. If you see an error from Windows Media Player that says “compatible DVD decoder not installed,” this means that a plugin (called an mpeg-2 decoder) needed to play DVDs is not installed. The Windows Media Player plugin is sold for a fee.
How do you fix a CD that won’t eject?
First, turn your car off if it isn’t already. While the car is off, hold the power and the eject button. Press your CD player’s power and eject buttons down at the same time, holding them for about ten seconds. If your stereo has a “force eject” feature, it should spit out the CD.