How do I change the boot order on my Alienware? |

In this article we will cover the steps to change the boot order on your Alienware computer.

The “alienware boot options” is a question that I am asked on a regular basis. If you are looking to change the boot order on your Alienware, there are two ways to do so. The first way is by using the BIOS and the second way is by using UEFI.

To those wondering how to get to boot order, it’sin the normal bios > boot tab, turn legacy mode on thereand the boot order should a appear.

How can I modify my boot order permanently in this manner?

To set the boot sequence, type:

1. During the first starting screen, hit ESC, F1, F2, F8, or F10 to exit.
2. Select the BIOS configuration option.
3. Select the BOOT tab using the arrow keys.
4. Move a CD or DVD drive’s boot sequence to the top of the list to give it precedence over the harddrive.

Subsequently, question is, how do I change the boot order on my Dell laptop UEFI? Tap F2 key at the Dell logo screen to enterSystem Setup or BIOS. Boot mode should be selected asUEFI (not legacy) within the BIOS go to the General >Boot Sequence click Apply. Note: If the system is not set toboot to UEFI, change it from the BIOS (F2)during startup or from the One-Time Boot (F12)menu.

Also, what’s the best way to go to the Alienware boot menu?

1. Switch on your computer.
2. As the machine boots up, keep tapping the F2 key.
3. After the Alienware logo screen, the BIOS should load.

What is the best way to choose a boot device?

“Reboot and choose correct Boot Device” on Windows is fixed.

1. Your computer should be restarted.
2. To access the BIOS menu, press the appropriate key.
3. Select the Boot option from the drop-down menu.
4. Change the boot order so that your computer’s hard drive is listed first.
5. Save the changes.
6. Your computer should be restarted.

Answers to Related Questions

Should the Windows boot manager be the first to load?

Because the Windows Boot Manager is the only one that boots Windows under UEFI, it must always be first in Boot Priority. With contrast to Legacy BIOS, where the hard disk is the first thing to boot, in this BIOS, the hard drive is the last thing to load.

On my HP UEFI, how do I change the boot order?

Setting up the boot order

1. Restart or turn on the computer.
2. To access the BIOS settings menu, hit the f10 key when the display is blank. On certain systems, hitting the f2 or f6 keys will bring up the BIOS settings menu.
3. Go to the boot settings once you’ve opened the BIOS.
4. To modify the bootorder, follow the on-screen instructions.

How can I get legacy UEFI media to boot?

What should you do if Legacy Boot does not work?

1. Forcibly restart your computer three times to get to the Advanced Recovery option.
2. Select Troubleshoot from the drop-down menu.
3. Select the Advanced tab.
4. Select the UEFI Firmware options.
5. Finally, press the Restart button.
6. Disable Secure Boot and RAID On in the BIOS/UEFI Settings (enable AHCI).

In Asrock, how can I modify the boot order?

When the power is turned on, press F2 to access the BIOS settings menu. Select the “Boot” screen. Go to the “Boot settings Configuration” subscreen. “Boot From Network” should be set to “Enable.”

On an HP, how can I modify the boot order?

To change the boot order on most systems, follow the procedures below.

1. Restart or turn on the computer.
2. To access the BIOS settings menu, hit the f10 key when the display is blank.
3. Go to the boot settings once you’ve opened the BIOS.
4. To modify the bootorder, follow the on-screen instructions.

How can I start my computer from a USB drive in BIOS?

Windows will boot from a USB drive.

1. Your computer’s power button should be pressed.
2. Press ESC, F1, F2, F8, or F10 at the first starting screen.
3. The setup utility page will show when you opt to begin BIOS Setup.
4. Select the BOOTtab using the arrow keys on your keyboard.
5. Move USB to the top of the boot order.

In BIOS, what is legacy mode?

When booting into Windows PE (WinPE) or Windows Setup, you may choose between UEFI and older BIOS modes. Install Windows using the newer UEFI mode rather than the traditional BIOS mode, since it has greater security measures. You’ll need to boot to legacy BIOS mode if you’re booting from a network that only supports BIOS.