How do I factory reset my Polycom VVX 500? |

If you’re experiencing connectivity issues with your Polycom VVx500 phone, then this is the article for you. This troubleshooting guide will show how to reset it and get back on track.

The “polycom vvx 500 factory reset without password” is a question that has been asked many times before. If you have a Polycom VVX 500, this article will help you find the answer to your question.

Polycom VVX 500 Reboot & Factory Reset

1. Reboot the phone by pressing and holding the 0, 1, and 3 dial pad keys at the same time for around three seconds, or until a confirmation tone is heard.
2. Restore Factory Defaults: During the Updater’s countdown process, press and hold the 1, 3, and 5 dial pad keys simultaneously until the passwordprompt displays.

How can I reset my Polycom ip6000, taking this into account?

Method 1: When the phone boots up to the countdown screen, press and hold the numbers 6, 8, and *. Hold these three keys down until the countdown is complete, at which point the phone will ask for a password. This password is 456 by default. To restore the phone to factory settings, enter this password.

The question then becomes, “How can I reset my Polycom VVX 311?” What is the procedure for resetting your Polycom VVX phone?

1. To force the phone to reset, press and hold buttons 1, 3, and 0.
2. As the phone powers up, turn it on and wait for the Starting Application prompt to display.
3. To exit the Starting Application dialog, press cancel.
4. From 7, the Welcome dialog will count down.

So, how can I erase the password from my Polycom phone?

Without the Admin Password, factory reset your Polycom phone.

1. IP 320, 321, 330, SoundPoint IP 320, 321, 330, SoundPoint IP 320, 321,
2. Press and hold the 4, 6, 8, * keys on the SoundPoint IP 301, 501, 550, 600, 601, and 650, as well as the VVX 1500.
3. Dial pad keys 6, 8, and * for SoundStation IP 6000.
4. Press and hold the dial pad keys 1, 3, 5 on the VVX 300, 310, 400, 410, 500, and 600.

How can I restore factory settings on my Polycom?

To do so, follow these steps:

1. On your Polycom phone, press “Menu.”
2. Navigate to “Settings” –> “Advanced”. You will be prompted for a password.
3. “Administrative Settings” should be selected.
4. Go to “Reset to Default” at the bottom of the screen.
5. Navigate to “Reset to Factory” from the Reset to Defaults menu.

Answers to Related Questions

What is the procedure for resetting my Polycom admin password?

How to revert to the default Polycom admin password

1. Find the MAC address (serial number) of the phone you wish to reset and write it down.
2. Turn off the phone.
3. Turn on the phone.
4. While the phone is turning on (you have around 6-8 seconds to do this step):
5. You’ll be asked to enter the admin password after holding down the digits for a few seconds.

What is the procedure for factory resetting my Polycom SoundPoint IP 331?

Press and hold the 1, 3, 5, and 7 on the dial pad at the same time on 331, 335, 430, and 450. Press and hold the 4, 6, 8, * on the dial pad at the same time for SoundPoint IP 301, 501, 550, 600, 601, and 650. 6, 8, and * dial pad keys for SoundStation IP 4000, 500, and 6000.

What is the procedure for factory resetting my Polycom SoundPoint IP 550?

To restore the factory defaults of the SoundPoint IP phone’s setup via the phone’s menu, do the following:

1. To access the menu, press the Menu key.
2. Select Settings > Advanced.
3. Press the Enter soft key after entering the administrator password.
4. Select Admin Settings > Reset to Default > Reset Local Config….
5. Yes is pressed with a soft key.

What is the procedure for resetting my Polycom VVX 400?

Reset your Polycom VVX phone to factory defaults.

1. Press and hold “1,” “3,” and “5” as soon as the “Welcome” message displays.
2. Release them only when you see the message “Enter Password.”

What is the procedure for rebooting a Polycom phone?

Reboot the Phone—For roughly three seconds, or until you hear a confirmation tone, press and hold the dial pad keys 0, 1, and 3 consecutively. Restore Factory Defaults—During the Updater process, press and hold the dial pad keys 1, 3, and 5 simultaneously until the password prompt displays.

How do you get a Polycom phone unlocked?

A: Enter “456” to unlock the phones (access the advanced settings menu). The default password should be this. You may also deactivate the phone lock function using the phones’ web interface. “Phone Lock” is found under the “Settings” menu.

How can I reset the factory settings on my Polycom VVX 501?

Polycom VVX 500 Reboot & Factory Reset

1. Reboot the phone by pressing and holding the 0, 1, and 3 dial pad keys at the same time for around three seconds, or until a confirmation tone is heard.
2. Restore Factory Defaults: During the Updater’s countdown process, press and hold the 1, 3, and 5 dial pad keys simultaneously until the passwordprompt displays.

What is the Polycom default password?

It may be found at the bottom of the Polycom screen: In your browser, go to the IP address; you’ll be asked for a login and password. The default login and password for the HDX are admin and serial number.

What is the Polycom IP 6000’s default password?

Enter the default password, which is 456. If you’ve changed it to anything else, you’ll need to replace it with this. Choose “1. Admin Settings” from the drop-down menu.

What are the options for changing the settings on my Polycom phone?

[FAQ] How can I modify the network settings on my phone manually?

1. Select Settings by pressing the Menu Key.
2. Choose Advanced.
3. Please enter your password here (Standard 456)
4. Go to Administration Settings and click it.
5. Select Network Configuration from the menu.
6. Select Ethernet from the drop-down menu.
7. Disable the DHCP server.
8. Set the IP address, subnet, and gateway for your network.

On a Polycom phone, how do you update your password?

You may change the default password on a Polycom phone after it has been registered and is in operational mode by performing the following:

1. Select Menu from the dropdown menu.
2. Choose the third option, Settings.
3. Option 2 is the most advanced.
4. 456 is the password.
5. Option 1 should be chosen.
6. Option 6 should be chosen.
7. Enter the old password, create a new one, and confirm the new one.

What is the procedure for changing the name on my Polycom phone?

Handset-based configuration.

1. Press the Home key to return to the previous screen.
2. Scroll to the right with the scroll wheel until you locate Settings.
3. Advanced is located at the bottom of the page.
4. Enter the password for the handset. 456 is the default password.
5. Navigate to the Administration Settings page.
6. Line Configuration is located at the bottom of the page.
7. Go to Line 1 by scrolling down.
8. Choose a name for your display.

The “polycom factory reset key combination” is a question that has been asked many times. The answer to the question is as follows: